Rules • MN

Plug-In Solar in Minnesota

Minnesota has retail-rate net metering up to 40 kW under Minn. Stat. § 216B.164 and a Solar*Rewards / Solar Energy Standard for IOUs. Permitting and licensed electrician requirements apply.

Generally allowed (with conditions)
Disclaimer: This page is educational and not legal or electrical advice. Policies change frequently — verify every detail with your utility, state public utility commission, energy office, local building department, and a licensed electrician before purchasing or installing any plug-in solar equipment.

Net metering & export compensation

Statute requires utilities to offer net metering at retail for systems ≤40 kW (IOU) / 1 MW (co-op or muni at avoided cost).

Interconnection process

Minnesota Distributed Energy Resources Interconnection Process (MN DIP).

Permitting & inspection

State Electrical Board permits via 1716 inspectors statewide; cities/counties handle building permits.

Utilities operating in this state

Xcel Energy, Minnesota Power, Otter Tail Power, plus generation & transmission cooperatives.

Electrical code (NEC) considerations

The U.S. National Electrical Code (NEC) does not have a listed pathway for backfeeding a standard 120 V receptacle from a solar inverter. Article 705 covers interconnected power production sources and generally expects a dedicated, breakered, labeled circuit. Many AHJs that follow NEC 2017/2020/2023 will not approve a cord-and-plug PV connection on that basis, regardless of state policy.

HOA, landlord & solar access

Check your lease, HOA covenants, and condo rules. Many states have a 'solar access' or 'solar rights' law that limits HOA restrictions on rooftop PV, but those statutes were written for permanent installations and rarely mention plug-in or balcony kits explicitly. Renters almost always need written landlord permission.

Official sources to consult

Bottom line for plug-in solar buyers in Minnesota

Even where state policy is favorable, U.S. utilities and inspectors generally do not recognize a cord-and-plug PV connection. If you want to be fully code-compliant and earn export credits, plan on a permitted, hard-wired install by a licensed electrician with a signed interconnection agreement. Off-grid uses (running a single appliance, charging a battery, RV/shed power) avoid most of these rules but still need to follow product instructions and basic electrical safety.

Other states

See all 50 states + DC